Ulincos Touch Switch UT19Z11 Latching Switch DC 6V to 24V Blue LED ON When Switch ON, Suitable for 19mm 3/4″ Mounting Hole

What You Get:
1 * Touch Switch
1 * Instruction

What’s the Touch Switch:
Touch switch, just touch it! It is different from the push button switch. You don’t need to push anything, just touch it! Like touch your smartphone!

This is a perfect choice if you are in need of a fashion switch! On the front of the switch is an illuminated blue LED ring. On the back there are 4 wires, replace the ordinary terminal pins. Make switch installation a breeze!

The touch switch is rated for 7A MAX /DC 6-24V.

What’s the Touch Switch Used for:
Most often the Latching touch switch is used for lights (Such as critical lights, chassis lamp, dome light), or the On/Off function circuits.

About Latching Switch type:
The light (device) is off when initially connecting to electricity.
The light (device) will be on and off by each touch.
Continue to cycle.

What’s Note:
*The touch switch can’t be used on a pump.I
*The input power need to be constant-voltage source. A constant-current source (like LED driver, Oupput: DC12-24V 300ma) CANNOT fit the touch switch!
*The touch switch doesn’t work with wet or damp fingers.
*The touch switch cannot be used in AC circuit. Don’t exceed the rating volts! Only DC 6 – 24V.

What’s the Customer Support:
If you have any questions, feel free to contact us by E-mail any time. We get professional customer service staff and technician to help you.

Specifications:
Head diameter: 7/8″ ( 22mm )
Mounting hole size: 3/4″ ( 19mm )
Depth inc contacts: 1.1″ ( 28mm )
Switch Type: Latching Switch
Input Voltage: DC 6V-24V
Output Current: 7A MAX
LED voltage: DC 6V-24V
LED color: Blue (LED ON when switch ON)
Head shape: Flat
Enclosure material: Stainless Steel
Protection level: IK10
Electrical life: 500,000 cycles
Operating Temperature: -20℃ ～ +55℃

Touch switch, just touch it!
Latching Switch Type: Touch it, the device is ON; Touch it again, the device turns OFF
LED ON when switch is ON !
The wires replace the terminal pins, make installing very easy
Touch Switch, normally be used to control the lights. Don’t exceed the rating amps and volts, you can run it on your other projects.